Use a Hair Toner for Brassiness For clients who want their color touched up or their freshly-lightened locks beautifully balanced, a toner is your go-to. Try mixing in a shade with a major or minor tone of color that's /2, /6 or /8.
A purple or silver toner works to neutralise any brassy shades that sometimes develop in dyed hair. If you use. When you don't have time for a trip to the salon, a correcting and conditioning spray will see you through, or try out a purple shampoo for an instant colour revival during your wash routine.
Comments452 If your hair after bleaching is an orange tone, you use wella T14 (blue base). If your hair is more of a yellow tone after bleaching, use wella T18 (purple/violet base). If you put T14 on yellow hair, it will turn slightly green.
Hair toner can potentially cause damage to your hair, though it is generally considered less damaging than permanent hair color. Here are some key points to consider: Chemical Composition: Toners often contain mild chemicals, such as ammonia or peroxide, to help deposit color and neutralize unwanted tones.
To cancel out brassy orange hair, you should use a blue toner or hair dye. In color theory, blue is opposite orange on the color wheel, which means it can neutralize the unwanted brassy tones.
Applying a hair dye or a hair toner for orange hair can neutralize some of this warmth, but only temporarily. As time passes, the cooler tones in your toner or dye will fade, and those warmer undertones will resurface.
You want the hair cuticle to be open for toning. Towel-dry hair to about 65 - 75% dry then start toning. Usually color & bleach is on dry hair, even toners and colors that do not require developer; however toner that uses developer is recommended on towel dried hair.
Is toner less damaging than hair dye? Yes, as studies show, toner is significantly safer for your hair than permanent dye. That is because it causes no structural harm to the hair fibre, but only coats the outsides of the strands.
At-home toners help to maintain your hair colour between salon visits and come in shampoos, conditioners and hair masks that contain purple, silver or blue pigments. The difference between these and in-salon toners is that at-home toners contain less pigments, meaning they won't last quite as long.
For creating the most ashy blonde.
Wella T14 has a blue-violet base, which means it will counteract (or reduce) gold / yellow orange tones. This is a super cool toned toner that works best on pale yellow hair.
Toners like Wella T14 and Wella T18 are designed to eliminate brassiness and neutralize unwanted warmth so you can get a nice, clean blonde. Plain and simple, Wella T14 is a violet-blue base while T18 is a violet-violet base.
The Wella T15 is really designed for hair that's lighter than the orange, so you won't get the full effect of the toner. However, you will see that it's reduced some of the brassiness while keeping the hair a warm tone.
Use a purple or blue shampoo
Blue and purple shampoos neutralise unwanted brassy tones to reveal a cooler blonde or light brown shade. Examine the colour of your hair currently, and find the colour that is exactly opposite it using a colour wheel.
There's two reasons why your hair is still brassy after toning or colouring. Either the undertone of the toner/colour is wrong, or the product is too light for you.
In the case of orange hair, a touch of blue pigment will cool and calm too-warm locks, while a hint of violet is also helpful for yellow/orange strands on a level 7.
Less hydrogen peroxide means that it's a healthier alternative to dye. For this reason, many stylists will opt for toner. Unfortunately this formulation also means that the results are semipermanent, rather than permanent. Every 3-4 weeks, hair toner will need to be refreshed to maintain the same shine and color.
Overlapping the toner application or leaving it on for too long can lead to overprocessing, which may result in dryness, breakage, or a change in texture. To avoid overprocessing, it's crucial to follow the manufacturer's instructions carefully and monitor the toner's development time.
Apply to towel dried hair and develop for up to 30 minutes, checking frequently for desired result.
You should wait to shampoo your hair again after applying toner for about 24 hours. This will allow the toner to set and not wash out of your hair.
Apply the toner first to areas that require the most color correction or simply apply to the central part of the strands before working up to the roots and down to the tips.
Your toner must be mixed with developer. Developer (also called peroxide) activates the toner - without it your toner won't work. It is recommended to use 20 Vol Developer with Wella Toners, but you can also choose to use 10 Vol Developer if that suits you better. 20 Vol Developer: This is the stronger choice.
Toning Mistakes
Some people have warmer undertones than others, and those warm undertones can look brassy if not toned with a neutral or cooler shade.
Toner does not have to be used evenly on all of the hair, but it can be. Don't worry if you make a mistake and get it on the darker strands of your hair; the toner will not affect them. For example, you may want to tone down highlights or your roots. Always apply toner to damp hair so it distributes evenly.
This depends on how often you wash your hair. The less frequently you wash your locks, the longer your colour stays in, but you can increase the longevity of your colour by using professional hair care. Depending on you hair type and hair condition, toner can last between 2-to-6 weeks.