According to hair professionals, toners should be left on the hair for approximately 15 to 20 minutes and maximum for 45 minutes if the brand requires it in the manual. Keep in mind that you must choose the appropriate color of the toner to achieve the end color you desired.
What happens if you leave toner in for more than 30 minutes? If you leave it on for more than 30 minutes, you may end up with a color that is too dark or too light. Leaving it on too long will also deposit too much color in your hair – which could end up looking green!
Mix your toner with a developer in a 1:2 ratio. Use an applicator brush to work the mixture into your hair, focusing on the areas with unwanted undertones. Leave the toner in for up to 45 minutes, then rinse, wash with a moisturizing shampoo and deep condition.
What is this? Leave the toner on for approximately 8-10 minutes for lighter hair and up to 20-30 minutes for darker hair. This toner removes “brass” for perfect blonde hair. To achieve the best results, you should lighten your hair before applying the toner.
Toner comes in all sorts of strengths, shades and sizes, but the general advice is that you should NOT exceed 45 minutes as you don't want your hair to be excessively exposed to loads of products (especially if you're going the whole hog and dying and toning your hair at the same time).
The chemicals in ammonia-based toners penetrate your hair shaft and alter your hair structure in order for the new color to settle into the hair shaft. This makes them great for transforming super brassy hair. But these toners can still cause dry, brittle, and limp hair, just as hair color or bleach can.
Toner should never be used more than once a day. If you use it too often, it will damage your hair irreparably. This means you can do it as many times as you like as long as you keep toning on a regular basis to keep the colour from fading. If you want to keep your hair ash-colored, you must tone it with shampoos.
If the toner failed to work effectively on the orange hair, a blue toner must be applied again to neutralize the undesirable tone. If you feel that the orange tone is too dark or intense, you can bleach your hair again and then apply the blue toner to achieve a lighter blonde.
A toner won't lighten your hair, but dyeing or bleaching will. If you just want to refresh your natural color, using a toner may be the best choice.
You Should Only Tone Damp Hair
According to hair colorists, your hair should be about 70% dry before toning. At this level of dryness, the toner can easily penetrate the hair and be spread up and down the hair shaft without any trouble.
Why did my hair get darker with the toner? As the bleach mixture works on the inner part of your hair, your base color breaks down, which makes your hair lighter and darker…. Without knowing how exactly they should use the toner on their hair, many women use it.
Depending on you hair type and hair condition, toner can last between 2-to-6 weeks. Hair that has been coloured previously can sometimes hold toners for less time than hair that has only been coloured once, so may need more regular toning.
You should rinse your hair of the toning mixture after 30 minutes. Remember that this product has ammonia in it and that makes the cuticles of your hair strands swell to absorb the product. This process causes damage to your hair, so you don't want to leave it in longer than necessary.
Avoid letting purple toners sit on your hair too long.
It can be tempting to dump a ton of purple shampoo and conditioner on your hair and let it sit for a while, but applying too much and letting it sit too long are the most common causes of over-toning.
You must always apply toner on 70% dry hair so neither completely dry nor completely wet. After the exposure time has passed, rinse your hair with plenty of water and apply your regular conditioner to nourish the hair strands. Never use shampoo after toning because you run the risk of striping the toner pigments.
Your toner should not burn or sting during application. The only situation in which you should feel a slight reaction is if your toner contains an exfoliating acid or active ingredient.
Is purple shampoo a toner? Any product that dispenses pigment to adjust hair tone can be considered a toner, and that includes purple shampoo. Its pigments work to neutralize brass.
If your hair is orange, you'll need a blue toner. Try a blue shampoo to tone the brassiness and get rid of the orange. This color toner is commonly needed for darker hair.
The toner just gives your hair a slightly different look, depending on the tones you want to remove – be that cold or warm tones. So, can you use toner to darken highlights? Actually, yes! It won't give darken your hair a lot, but it can be done.
Sometimes you need to bleach your hair to a lighter level and then apply a toner to darken it and remove any remaining yellow. Even if you have your hair done at the hairdresser, yellow tones can appear after a few washes as the toner used to remove the unwanted yellow tones fades away.
You're going to want to wait for at least 7 to 8 weeks before you tone again — or wait until your hair is back to its normal state – however long that takes. To keep your hair as healthy as possible, do whatever you have to do to wait the appropriate amount of time before toning again.
Be sure to choose a purple-based shade, which will be marked on the bottle. Toners can have blue, purple, or green base colors. To fix yellow hair, you want purple. Since yellow and purple are opposite on the color wheel, they neutralize each other when combined.
Toners take 1-2 weeks of consistent use to see results with pore size and redness. Like cleansers, you should be seeing results fairly quickly. If you notice redness, irritation, or small clogged pores after using your toner, immediately discontinue use!
You might often hear about how some hairdressers use purple shampoo to pre-tone hair before applying colour. This is basically a little added step after bleaching or lightening hair where purple shampoo is used to cool down the yellow or golden tones of the bleached hair before colouring or toning.
It is most commonly used to reduce brassiness. While hair toner changes the tones in your hair, it won't drastically alter the color like hair dye. Hair toner has minimal to no amounts of ammonia, so it is considered a semi-permanent hair dye. It enhances your hair color.