10 Volume (3%): Used for depositing colour without lifting the natural hair colour. This volume is suitable for toning or darkening. 20 Volume (6%): Provides moderate lift and is commonly used for covering grey hair or lightening natural hair colour by one to two shades.
Get your lightening on with Salon Care 10 Volume Crème Developer. This gentle lift formula provides a thick gel consistency that's easy to handle with a slight lightening action. Lighten and color in just one step by mixing it with your shade of choice or with a lightening powder for a brighter base.
Hair dye volumes refer to the strength of the developer, which impacts the level of color lift. A 10 Volume developer provides minimal lift, perfect for depositing color. A 20 Volume developer lifts hair by 1-2 levels, while a 30 Volume developer lifts by 2-3 levels.
10 Volume (3%) Developer
When your current hair color is close to your desired hair color, a Volume 10 developer is used to mix with bleach. Depending on your hair texture and history, it provides a gentle lightening of 1-2 levels.
Even if you're using it with a 10 volume, it's still permanent color with a high high amount of ammonia. If you're using this as a filler you're doing unnecessary damage to your hair, and possibly creating more porosity issues.
10 volume developers contain 3% hydrogen peroxide. These developers are also called no lift developers because they only provide moderate lift to your cuticles, i.e., lift by 1 level. This developer is perfect for when you are going to color your hair a darker color than the natural shade.
The standard developer for gray coverage is 20 Volume; however, 30 Volume and 40 Volume can also be used if the percentage of gray is low and additional lift is needed to achieve the desired result.
Too much developer dilutes the dye, resulting in a lighter, less vibrant color and uneven application. It can also weaken the dye's effectiveness.
10 Vol Developer is also great if you're looking to go slightly darker with your toner, or if you're looking for the most powerful toning results on brassy orange hair. At Tint Department we use and recommend Hi Lift Developers and have found these give perfect, consistent results.
From a strand test, you should also get a better sense of how many sessions you'll need to make the full transition. For example, going from dark brown to light blonde hair may require three to four sessions.
If your hair is brown, you may need to bleach it more than once before you apply the grey dye. It's important you get your hair as light as possible before you attempt to turn it grey – this will help ensure a more even tone and vibrant, all-over colour.
Use 30 Vol if you want to achieve lift without bleach.
Use 10 Vol for tone down coloring and level-on-level coloring. Use 20 Vol if you are aiming for a 1-2 level lift (and if you have grey hair that needs covering). Use 30 Vol if you are aiming for a 2-3 level lift. Use 40 Vol if you are aiming for a 3 level lift and if the hair is particularly difficult to color.
If you're using a permanent hair color, you'll need a developer with a higher volume. This is usually between 20 and 30 Vol. And if you're looking to really lighten your hair, you'll need a developer with an even higher volume, between 30 and 40 Vol.
10 volume bleach can be safely left in your hair for up to 30 minutes before the chemicals stop working and the hair starts being over-processed.
Mixing ratio is 1:1 (equal parts color and developer). Use with either an applicator bottle or a bowl and brush.
10 Volume is only used to open the cuticle layer so the color molecules deposit in the cortex for long-term results. Use 20 Volume when lifting hair color one or two levels (levels refer to the oxidizing potential).
A: YES! Any toner you use that touches bleached pieces of hair (highlights) WILL deposit color if it uses a developer with a number like "Wella 10 Developer" or "20 Develper". But Wella T14 has a different base than this toner you're browsing.
Taking the next step in the laws of neutralization, you can conclude that a violet toner or blue violet color formula will cancel out the unwanted yellow or gold tones in your blonde hair color; blue will cancel out the unwanted orange or brassy tones in your brown hair color, which is where products like blue shampoo ...
Similar to 5 volume, 10 volume can be used with permanent color lines for depositing color, however, it will not offer much grey coverage or lift. If the hair is a finer fabric it could over a slight one level lighter shift in base color and grey blending.
So depending on the results you want to achieve, you will mix your developer and dye in different proportions. It varies with the brand but the recommended mixing ratio of dye to Developer is 1-to-1, 1-to1. 5, or 1-to-2 if you need extra lightening.
So, why has your hair become stained with hues of blue or purple? Well, you may have either over toned your hair, the toner is too strong, you've applied too much or your hair is very porous. Uh oh! Luckily, there are ways to reverse this!
Pigment loss occurs naturally in hair as we age. Along with the changes in pigmentation, grey hairs can also undergo structural changes Grey hair is often also coarser. The outer cuticle layer of greys can be more tightly packed and layered, making them resistant to colour absorption.
10 volume: This is a mild low-level of developer. This is useful if you only want to slightly change the color of your hair. It's also a good volume to use with a lot of toners. 20 volume: This is stronger than 10 volume and it's commonly used for lightening hair at home as it lifts 1 to 2 levels.
Is it better to go lighter or darker to cover grey hair? As for your permanent colour kit choice, for the best grey coverage, Josh recommends choosing a shade close to your natural root colour (that's the colour between the greys.) "Make sure to never stray more than two shades away from this,” says Josh.