If your AirPods volume is too low only when you use them with your iPhone, go into the Settings app, then Sound & Haptics > Headphone Safety. Make sure the 'Reduce Loud Sounds' toggle switch is set to 'off. You should also check Accessibility settings, as these can sometimes make your AirPods too quiet.
To make your AirPods louder, clean the speaker grilles, check and adjust your device's volume settings, disable Low Power Mode, and recalibrate the Bluetooth volume. You can also try adjusting the Music EQ settings for a louder sound.
To turn the volume up or down, place your thumb on the stem of either AirPod, and use your index finger to swipe up or down on the Touch control.
If you are experiencing volume or balance issues, always check for wax and dirt in and around the earbud and driver and complete cleaning of the earbuds as described above. If the issue persists, there may be earwax/dirt stuck in the small holes in the grille in front of the driver, preventing sound output.
Turn off Low Power mode on your iPhone. Turn off ``Reduce Loud Sounds'' on your iPhone. This feature sets a maximum volume limit, which can make the AirPods sound too low. Reset Your AirPods.
Over time, the battery capacity of AirPods naturally degrades, resulting in shorter battery life and reduced overall performance. This degradation is a normal characteristic of lithium-ion batteries commonly used in portable electronic devices.
AirPods can appear to get quieter over time due to several factors. Accumulated dirt and earwax in the speaker grills can reduce sound quality. Additionally, battery degradation might affect volume levels as the battery ages.
Sometimes, the issue is with the audio settings on your device. Check if any volume limiters or sound equalizers are enabled, as they can limit the maximum volume output. Adjust these settings to unleash the full potential of your headphones and get back the desired volume level.
The quietness of your headphones at maximum volume can be due to several factors including connectivity issues with wireless devices, dirt or debris in the port (for wired), or damaged components. Ensuring your Bluetooth connection is stable and the headphone ports are clean can help resolve this issue.
Like their predecessors, the AirPods (3rd gen) are designed to last between 2 to 3 years, factoring in the typical 300 to 500 charge cycles that lithium-ion batteries can sustain.
Make sure that your AirPods are in Bluetooth range of your iPhone, iPad, or Mac that's connected to Wi-Fi. Connect your charging case to power. Put your AirPods in their charging case and close the lid. Keep the lid of the charging case closed, and wait at least 30 minutes for the firmware to update.
To turn the volume up or down, say “Hey Siri”, then say something like “Turn up the volume” or “Turn down the volume”. Or drag the volume slider in the app you're listening to, on the Lock Screen of your iPhone or iPad, or in Control Centre.
If the volume is lower than it should be with the current setting, clean the microphone hole, speaker, and air duct. Before cleaning the speaker, detach the ear tip from the latch at the bottom of the earbud. Remove any earwax or debris with a clean, dry, and soft brush, cotton swabs, or other tools.
Check the sound settings on your device
It's a good idea to check the sound settings on your playback device to make sure it's not limiting your volume. Phones have volume limiting features to protect your hearing, but you can turn that feature off if you want to exceed that limit.
There are several reasons why your iPhone's volume remains low despite being set to its maximum level. It's possible that external factors such as noise cancellation settings or Bluetooth connectivity issues are affecting volume output. Additionally, corrupted media files or hardware malfunctions can reduce the volume.
If your AirPods are low on battery power, the volume may decrease. Give your AirPods a full charge to see if that improves the issue. You can check the volume by placing your AirPods inside the charging case and opening its lid near your iPhone or iPad.
The short life of an AirPod battery
The limiting factor is usually the lithium-ion battery powering these wireless devices, which degrades over time.
If there's no sound in one AirPod
Check the charge status on your iPhone or iPad to make sure that each AirPod is charging . Put the AirPod that isn't working in the appropriate ear. With the other AirPod still in the charging case, close the lid of the case. Play audio to test the malfunctioning AirPod.
You might need to reset your AirPods if they won't charge, or to fix a different issue.
Tackling the issue of fast battery drain in your AirPods usually involves addressing factors such as excessive feature use, outdated firmware, improper charging habits, and connection stability. Wear and tear naturally affect battery performance over time as well.